ConfigureEwf
(1)
XPe
(1)
Max
(1)
Ewfmgr
(1)
Tweaks
(1)
Etprep
(1)
Relies
(1)
EWF
(1)

Failed setting protected volume configuration with error 31

Asked By kbodil
17-Apr-08 05:57 AM
I purchased an industrial PC with an XPe image running with EWF RAM. I
made some tweaks to it (changed the shell app, desktop wall paper,
user accounts etc.) and then ghosted the image (EWF was still working
before the ghost). After I deployed the ghosted image, the EWF volume
was not found, and after search the newsgroup I found that after
running "RUNDLL32 ewfdll.dll ConfigureEwf Start" EWF would start.
However, when I try to enable it I get the error in the subject line.
I don't have the original image any longer and would like to get the
ewf running properly from the point I am at now.

Here is the output from ewfmgr.....

C:\Documents and Settings\Administrator>ewfmgr c:
Protected Volume Configuration
Type            RAM (REG)
State           DISABLED
Boot Command    NO_CMD
Param1        0
Param2        0
Volume ID       AA 45 AB 45 00 7E 00 00 00 00 00 00 00 00 00 00
Device Name     "\Device\HarddiskVolume1" [C:]
Max Levels      1
Clump Size      512
Current Level   1

Memory used for data 0 bytes
Memory used for mapping 0 bytes


C:\Documents and Settings\Administrator>ewfmgr c: -enable
*** Enabling overlay
Failed setting protected volume configuration with error 31.
A device attached to the system is not functioning.

Does anyone have any advice regarding what I need to do to make it
work?
thanks
kevin

If i remember correctly EWF relies on an additional partition.

Asked By Stefan Klein
16-Apr-08 01:29 PM
If i remember correctly EWF relies on an additional partition. Seems
that Ghost didn't store that. I don't know if post-deployment EWF
maintenance tools are capable of doing this or if you could add this
partition manually. Try to look up the manual for EWF partition.

Failed setting protected volume configuration with error 31

Asked By kbodil
17-Apr-08 05:57 AM
Its been my understanding that a RAM ewf partition is used for fba
only. After that it no longer used. If there are any other thoughts
please post.
thanks
kevin

I don't think so... use 'rundll32 ewfdll.

Asked By Stefan Klein
16-Apr-08 04:25 PM
I don't think so... use 'rundll32 ewfdll.dll ConfigureEwf' to recreate
the EWF volume.

If you want to clone/backup the system again be sure to save the whole
hdd (physically - with partition table) or at least with both partitions.

Quote from manual:
Failed setting protected volume configuration with error 31
Asked By kbodil
17-Apr-08 05:57 AM
thank you.... I ultimately needed to use etprep to delete the existing
ewf partition, then I was able to recreate it with rundll32...
Post Question To EggHeadCafe