Windows 7 - USB drive

Asked By Pete
06-Sep-07 10:38 AM
Remote (wireless network) computers cannot see the USB drive which is
connected to my XP computer.
Peter
Vista
(1)
XP
(1)
Elephant
(1)
Windows
(1)
Ramesh
(1)
Directories
(1)
Firewall
(1)
Gotcha
(1)
  Malke replied...
06-Sep-07 11:23 AM
OK. Have you actually set up file sharing on your Local Area Network
(LAN)? Shared out the USB drive?

Help us help you:
http://www.dts-l.org/goodpost.htm

In the meantime, here are general network troubleshooting steps. Not
everything may be applicable to you but since you provided so little
information, you can take the bits that you feel fit your situation.

*****
Problems sharing files between computers on a network are generally
caused by 1) a misconfigured firewall; or 2) inadvertently running two
firewalls such as the built-in Windows Firewall and a third-party
firewall; and/or 3) not having identical user accounts and passwords on
all Workgroup machines; 4) trying to create shares where the operating
system does not permit it.

Here are some general networking tips for home/small networks:

1. Configure firewalls on all machines to allow the Local Area Network
(LAN) traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
aren't running a third-party firewall or have an antivirus with
firewall, then you're fine.  With third-party firewalls,  I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall.

2. With earlier Microsoft operating systems, the name of the Workgroup
didn't matter. Apparently it does with Vista, so put all computers in
the same Workgroup. This is done from the System applet in Control
Panel, Computer Name tab.

3. Create identical user accounts and passwords on all machines. If you
wish a machine to boot directly to the Desktop (into one particular
user's account) for convenience, you can do this. The instructions at
this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

4. If one or more of the computers is XP Pro or Media Center:

a. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder Options>View tab) and create identical user
accounts/passwords on all computers.

b. If you don't care about using Pro's advanced features, leave the
Simple File Sharing enabled.

Simple File Sharing means that Guest (network) is enabled. This means
that anyone without a user account on the target system can use its
resources. This is a security hole but only you can decide if it matters
in your situation.

I think it is a good idea to create the identical user
accounts/passwords in any case when Vista machines are involved and it
isn't an onerous task with home/small networks.

5. Create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder. See the first link above for details about
Vista sharing.
*****

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
MS-MVP Windows - Shell/User
  Pete replied...
06-Sep-07 08:14 PM
Thanks Malke.
I had sharing turned on for the USB drive.  For no good reason, I turned
sharing off and then set it on again.  Too my surprise, all is now well.
Peter
Create New Account
help
Windows 7 networking xp to vista I have a Win xp machine and a Win Vista machine. The vista sees and prints through the xp but the xp can not get logged into the vista machine. The error message I get is: \ ron
Windows 7 Seeing other computers in workgroup Hey there, I just upgraded to vista. All other computers on my home network are running XP. I managed to connect to the network, and to the internet. The problem is that missing? Stegura start reading previous posts and welcome to the half-baked networking features in vista. good luck solving your problem. Oskar In spite of what the other poster said, networking with Vista and XP is very easy. You just need to take things step-by-step and not get your Local Area Network set up without much trouble. * ** ** This link will take you through Vista networking very well: http: / / www.microsoft.com / technet / network / evaluate / vista_fp.mspx Problems sharing files 1) a misconfigured firewall; or 2) inadvertently running two firewalls such as the built-in Windows Firewall and a third-party firewall; and / or 3) not having identical user accounts and
Windows 7 XP -> Vista: You do not have access . . . See administrator , Vista:, You, do, not, have, access, . . ., See, administrator" / > I've done considerable research and have insured that I am in compliance with the MS article "File and Printer Sharing in Windows Vista", but when I use a Save As dialog on my XP machine to save a file to the Vista machine I get the message "You do not have access to the folder xxxxxxx. See
Windows 7 Yet another Vista-Xp Network ? Had two XP machines connected together hardwire hub and cable. Everything worked flawlessly for sharing, but after one XP machine got upgraded to Vista then the problems began. I have read these groups for many days now and seen suggestions but cannot solve this problem. The upgraded machine can see and share the other XP machine just fine but the XP machine cannot access the Vista machine other than the Public folder. ALL computers have the
Windows 7 Access denied from XP computers I finally set up my home network. Three xp's and one vista. They can all see each other but the xp's can't access the vista drive. I keep getting the hours on this stuff. Hello maryse, If you haven't helps you. http: / / www.microsoft.com / technet / network / evaluate / vista_fp.mspx - - Eric Cross Microsoft MVP (Windows Networking) http: / / mvp.support.microsoft.com Thanks but I read it already and am still be careful about the assumptions you make about applicability. * ** ** This link will take you through Vista networking very well: http: / / www.microsoft.com / technet / network / evaluate / vista_fp.mspx Problems sharing files