Windows 7 - Troiuble migrating hard drive w/XP to a new machine

Asked By Ted Curtin
06-Feb-10 10:22 PM
I tried to install my current HD with XP into a new-to-me system (Intel MB
and 2.4G processor), but windows will not start. System seems to POST; I can
get into bios where everything seems OK, and can run a disk/memory diagnosis
program from floppy, but windows never gets to the splash screen - it gives
me the screen that says "Windows did not start properly, which mode would you
like to start in'.

When I have done this before, Windows has recognized the new hardware (MB and
processor) and gotten itself going. I also tried a HD from another system to
check, with the same results. Will I have to do a clean install of
Windows... or is this a hardware problem?

Many thanks!
Windows XP
(1)
Windows Server
(1)
XP
(1)
DNAf
(1)
XPhttp
(1)
Michaelstevenstech
(1)
Benjamin
(1)
Troiuble
(1)
  DL replied to Ted Curtin
07-Feb-10 04:14 AM
If your winxp was preinstalled by the PC maker when you purchased the PC,
then you cannot move it to new hardware as its locked to the origonal PC,
The license is not transferable.
If its a retail version of winxp, then often a repair installation will
allow you to install the new drivers provided for your new hardware
WIthout the corect drivers installed it aint going to work
  glee replied to Ted Curtin
07-Feb-10 01:26 PM
Changing a Motherboard or Moving XP
http://michaelstevenstech.com/moving_xp.html

How to Perform a Windows XP Repair Install
http://michaelstevenstech.com/XPrepairinstall.htm

--
Glen Ventura, MS MVP  Oct. 2002 - Sept. 2009
A+
http://dts-l.net/
  J. P. Gilliver (John) replied to DL
07-Feb-10 11:47 AM
I presume it did not actually get to the point where you were able to
answer that question.

--
J. P. Gilliver. UMRA: 1960/<1985 MB++G.5AL-IS-P--Ch++(p)Ar@T0H+Sh0!:`)DNAf
** http://www.soft255.demon.co.uk/G6JPG-PC/JPGminPC.htm for ludicrously
outdated thoughts on PCs. **

Some cause happiness wherever they go; others, whenever they go. - Oscar Wilde
  Ted Curtin replied to glee
07-Feb-10 05:49 PM
Thanks for the help, everyone - the Michaelstevenstech info looks like what
I need to switch over - my XP is retail version. Looks like I am lucky that I
have not had problems doing this before!
  Bruce Chambers replied to Ted Curtin
07-Feb-10 10:36 PM
That's very unusual; the two motherboards must have been close to
identical.




No hardware or Windows problem.  This is actually normal behavior.

Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific motherboard chipset and
therefore are *not* transferable to a new motherboard - check yours
before starting), unless  the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the one
on which the WinXP installation was originally performed, you will need to
perform a repair (a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it is a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS.  (If
you do not like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation.  It just is not going to fit.)  WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it.  On installation it
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed.  If it is been more than
120 days since you last activated that specific Product Key, you will most
likely be able to activate via the Internet without problem.  If it is
been less, you might have to make a 5 minute phone call.




--

Bruce Chambers

Help us help you:
http://www.catb.org/~esr/faqs/smart-questions.html

http://support.microsoft.com/default.aspx/kb/555375

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot
  J. P. Gilliver (John) replied to Bruce Chambers
08-Feb-10 02:39 AM
[]
[]
Why exactly does that make it more stable? (I am not saying it does not, I
just do not see why.)
--
J. P. Gilliver. UMRA: 1960/<1985 MB++G.5AL-IS-P--Ch++(p)Ar@T0H+Sh0!:`)DNAf
** http://www.soft255.demon.co.uk/G6JPG-PC/JPGminPC.htm for ludicrously
outdated thoughts on PCs. **

Some cause happiness wherever they go; others, whenever they go. - Oscar Wilde
  Chuck replied to J. P. Gilliver (John)
22-Feb-10 03:30 AM
Don't know about more stable, but it does allow windows to more fully
utilize the hardware's capabilities.
Even in the later 9x series, the Hal file could be different from one
machine to another, and, unless it was the basic version, might not work on
another hardware configuration.
Stability might be improved when the win hardware drivers more closely match
such things as processors and MBD chipsets.
Emulation modes are seldom as good as native modes. Also, even with Win 7,
it can be adviseable to load OEM MBD drivers, rather than the drivers
delivered with Win 7.
  glee replied to Chuck
22-Feb-10 09:27 AM
Pardon me?  Win9x did not have a HAL file.  The Hardware Abstraction
Layer is part of the NT family, but not the 9x family of operating
systems.
--
Glen Ventura, MS MVP  Oct. 2002 - Sept. 2009
A+
http://dts-l.net/
Create New Account
help
Troubleshooting Long Boot Time? Windows 7 Just re-imaged my PC last nite. The image was not from that long boot time has gone completely down the tubes. I am getting 1:25 to the Windows Desktop, but at that point there is no connectivity to my NAS box. TeamViewer, OTOH, is able to connect to it is server. . . so I know Ethernet is up and running. The NAS box eventually becomes available at trial-and-error removal of everything optional startup that I can think of? - - Pete Cresswell Windows XP Discussions WINDOWS system32 (1) Office (1) Vista (1) Adobe (1) Backup (1) Disk (1) Bit (1) XP (1) Is there anything listed in the Event logs that might be of help? Another thing you can do is enable boot logging using msconfig. - - SC Tom Try bootlog XP http: / / greatis.com / utilities / bootlogxp / Per JRosenfeld: I gave it a shot. it is probably
Why do you still use Windows XP? Windows 7 Give your reasons. Do you plan to upgrade ever? If so, when and why? If you use both XP and 7, do you ever plan on ditching XP for good? What will you do when support is dropped to the point where this OS will be problematic with new hardware? Personally I am waiting for Windows 8 to release a second service pack. XP sucked when it first came out until SP1. Even then, I find the moron-babysitting did not work, it had to enabled then disabled to be disabled for real. Sigh. . . Windows XP Discussions Windows XP (1) Windows Embedded (1) Windows Server (1) Microsoft Word (1) Windows
Will w8 have xp downgrade rights? Windows 7 Hi Guys, Has anyone heard any rumors on weather or not M$ will continue with its XP downgrade rights when Windows 8 comes out? -T Windows XP Discussions Windows XP (1) Windows Server (1) Windows Vista (1) Windows 7 (1) Office (1) Linux (1) Vista
cannot access WINDOWS UPDATE successfully . . . keeps soliciting New!Get Microsoft Update today! Windows 7 I am running Windows XP SP3 Home Edition on 1 of 4 PC's and it is been updated through early April 2011. Prior to this, accessing Windows Updates (via http: / / www.update.microsoft.com / windowsupdate / v6 / default.aspx?ln = en-us) worked to understand why. Recently, around the middle of April 2011, each time I went to Windows Update, the page initially appears and I can briefly see the 2 buttons (of which Get Microsoft Update today!" I have no interest in Microsoft Update for my PC running XP SP3 Home Edition because my other 3 PC's, all running Windows XP SP3 Professional with Internet Explorer 6 are having no problems with Windows Update. This
Chkdsk / Scandisk Windows 7 I still use Windows98 most of the time. I am not fond of XP, but I have XP on my laptop computer, and must keep it to use the WIFI. One thing that really irks me about XP is that it no longer has Scandisk. Chkdsk is really a major pain to use dropped it in favor of this worthless and annoying Chkdsk. . . . . What is wrong with MS???? Windows XP Discussions Windows XP (1) Microsoft Word (1) Windows Server (1) Windows XP SP2 (1) Word 2010 (1) Word